Відео

your install of the upmbrella is wrong making it cumbersome. you should open it half way so it extends over the screen then keep opening until it is completely opened then slide the umbrella in place over the screen. after you've fully opened the umbrella and placed it behind the screen, then you tie it to the rear view mirror and adjust and put down the visors for better hold. you tied it down first before opening limiting your working area. When you remove it just do the reverse. Bring the umbrella out from behind the screen first then close it. dont try to close it from behind the screen.

Thanks, this will be perfect for me. I don't need a lot of power, I just have a tiny yard and my edges look pretty good. Being lightweight and not dealing with mixing gas/oil or coping with a cord is worth a lot to me. I have fescue in my yard too, bluegrass is more common here in the US midwest, but it is even less drought tolerant, so I made the switch.

The "widebody" you're talking about isn't an STI feature, but is the standard body lines of the sedan GD impreza. The factory tinted glass is just usual tinted glass. It was an option from out of the showroom, and isn't hard to acquire aftermarket. The fuel efficiency in my 05 GG WRX is actually quite good. I get 450-500 on a full tank, 450 being the more spirited driving economy. One con that could be added to this, is the known common rust spots in the rear strut tower.

Should try out GYEON tire.

I used this product and not very efective. The best product i used is Soft 99 Glaco series , much better then rain x & turtle wax clear vue. Now i use after washing the car , Gyeon Bathe plus.....put in foam canon , spray on the whole car and rinse it off & dry. Also no streaks on windows and they feel super soft

Stupid Movie, what is left on that car is Tar and aspahlt, you need special tar remover for that or petro/or citrus. so if you use one of that first, lett that dwell on car for 3-5 minutes and then add Lift you will se a clean car, you should learn how to wash car and what chemical is used for what problem.

Yall need to give Armour detail supply tire + , nv onyx

Great product and review as well! Have you tried KCX PSS? If so, what do you think of it as a tire dressing?

Adams graphene tire dressing is my favorite and adams tire and rubber cleaner. I use adams and optimum polymer technologies for everything.

Appreciate the love SIr , awesome video!

Does the blade spin both ways that’s what’s confusing me and my new one

Hey there! Just watched your video and have couple of questions. Please answer it:- 1. I am also looking to buy MTM HYDRO SGS28 Gun with swivel but amazon doesn’t offer the fittings like quick connects. 2. I have Bosch Aquatak 125 bars pressure washer machine, so how do i connect hose pipe with MTM Hydro SGS28 swivel gun.? 3. And, what was the angle lanced(just before you plugged the kachre connector) the will you provide link from amazon so i can buy it

Use a disposable plastic cup to unscrew your filters the rest of the way. That was the cup catches the oil instead of it getting all over your hand

It will be a new purchase for me. Very helpful video, thanks so much!

Thank you!

5:43 Great advise!

I personally use rinseless in place of regular soap, rather than a traditional rinseless wash. The reason being exactly what you guys proved at the end of the video, which is that rinseless cleans your mitt better and I've noticed that it does actually draw more dirt to the bottom of your bucket compared to regular soap. I still like to foam first with KCX AF to remove 80% of the dirt and I still rinse after the contact wash because I like rinsing off all the agitated dirt and I like drying a clean car. I've currently been using Absolute however, after seeing how easily that white towel came clean I think RRW cleans better than absolute. Absolute will definitely remove some dirt from the mitt but RRW looks next level in that aspect.

KCx RRW is an excellent product.

What’s that bloower called😊

Attracts dust like crazy. Meguiars hybrid ceramic spray wax works amazing for me

LOVE this video. I always struggle around my drains using my weed eater!! Never occured to use my ryobi edger!! Thank YOU!

It will streak with more product. I would recommend trying one spray to mist it over the entire surface and see if it works. It’s also not great as a stand alone protectant.

You asked if anyone else has experienced streaking. Yes, that’s how I found your video. I’ve been struggling with Clarify Phobic and streaking on two different cars over the couple of weeks. It’s making me crazy. I even used Carpro Eraser to remove any existing residue on the windshield before applying Clarify. It still streaked - exactly in the way you described. Funny enough, the Eraser did a fantastic job on the glass and I’m going back out to clean off the Clarify with more Eraser!

Wipe off with a dump towel , it will resolve streaking issues

It’s garbage . I’ve used it & sold it on. Gyeon glass + is not much better tbh . Both smeary mess

How unfortunate. I would be so annoyed, especially after detailing the entire car. I hope you can get your money back on that one due to the safety concerns from reduced visibility.

Seems you sprayed too much over the glass and worked under direct sunlight which accelerate the alcohol to flash faster , just wipe off the residues smearing after 1min or so and it will come off.

I wonder if it needs a couple of drops of water on the final wipe to remove the smearing. If I remember correctly, Rain-x instructions tell you to do that to remove the haze.

I’m currently using Gyeon Q2M GLASS+ and it has great hydrophobic properties with no streaking issues if applied correctly using their 2 towel method. Maybe give it a go?

you can refill both, don't worry buying that cartridge

Can you cut a wider boarder away from the path

Can you cut a wider boarder out

Pro tip. Clean face of the wheel before barrels. Otherwise you are just grinding the filth pouring out of the barrels on the face of the wheels.

Which soap did you use in the bucket ?

I find gyeons wheel cleaner that includes the iron dissolver to be superior personally.

do you think the wood brush spinning that fast could damage hardwood decking? it's labor intensive to manually brush the entire deck to clean before brightening and oiling application. hoping this might be a time and labor saver. thanks!

In my tires really dont work on less you use it 1-0

I find it decent on wheels but, not on tires. For me, it doesn't cut through the grime. I only use water-based dressings and it struggles to remove the old layer. Keep the videos coming!

Thankyou. I used a carwash last night and didnt realise how much pressure the sprayer has. Oh no! What damage have i done? I now know what i should do next time. Like you have shown, i will be taking my own gear next time. I actually like the leaf blower!

Red3600 broken now can stop the blade with light touch of finger,

This pased for audi a6 4f ?

Excellent tutorial. Thank you. I am about to use my brand Ryobi Edger now that I watched your video.

Do not tell people not to run the wheel on the grass I have areas that HAS to be cut with the wheel on the grass.

I tried the Ryobi 18-volt edger for about 10 minutes I found it to be gutless I took it straight back from where I purchased it and exchanged it for the Ryobi 36-volt which does a great job. Pay a little more and you will be a great deal happier. The old adage you get what you pay for.

My daughter met her husband online and now lives in Adelaide. She grew up in the US. Love how everyone there has fences. When my son-in-law came here to visit he couldn't believe how many houses in the US have no fences. Love the accent. Thanks for the great video.

Sure, you don’t need this Tesla. All you do is complain. This car is not for you.

Brilliant!

Did a Dyno, without a tune, +5 whp, +4tq, peak, 10 whp/9 tq gain 2k rpm to 3.5k rpm The full IE intake gets your double that with the tune, the K&N only made additional 2hp & 1tq if tune added.

I've had my 2 gallon (7.5 litre) for 5 years now and it doesn’t quite put out at the original rate but i still get .25 gpm (almost 1 litre pm). Works great tor pesticides and weed killers and i always wash it out thoroughly. I'm in central Texas.

I really like the look of this one. I just might have to grab this one up. I have two other 40 volt Ryobi mowers. They both I've been working flawlessly for me for 4 years straight now. And I got a half decent size yard. Plus I still have the two six amp hour batteries that came with it. And they're still going strong. He won't go wrong buying a 40 volt Ryobi mower. At least the ones that I have are holding up.